Fujitsu ETERNUS DX60 S3 User Manual page 382

Chapter 4 Connectivity Management
4.2 Host Group Management
Filter setting
SAS Address
Host Group
Host Response
• If the SAS address is not displayed when clicking the [Rediscover] button, make sure that there is
no error in the connection environment, such as the connection between the host and the switch,
and the CA port settings of the ETERNUS DX. If there is no error in the connection environment,
contact the Support Department or manually specify the SAS address.
• If an error screen appears under the following conditions, check the parameter settings.
-
-
-
-
-
-
-
(3)
Click the [Add] button
 A confirmation screen appears.
Filter
Input the SAS address that is to be displayed.
SAS hosts matching or partially matching the entered SAS address are displayed.
When not using the SAS address for filtering, leave this item blank.
Input the host group name that is to be displayed.
SAS hosts which belong to any host groups that match or partially match the entered
name are displayed.
When not using the host group name for filtering, leave this item blank.
Select the host response that is to be displayed.
Any SAS hosts that are allocated to the selected host response are displayed.
The "Host Group Name" is not entered
The "Host Group Name" does not satisfy the input conditions
The "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the
interface types.)
Nine or more hosts are registered in the host group or no hosts are registered in the host group
The total number of host groups has exceeded the maximum number for the ETERNUS DX
The total number of hosts has exceeded the maximum number for the ETERNUS DX
A host with an unrecognizable LUN is added
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Description
382
P2X0-1270-13ENZ0