Mitsubishi Electric MELSERVO-J2S Series Transition Handbook page 542

[Appendix 2] Introduction to Renewal Tool
(1) Common items
Item
Built-in (0.1 kW to 7 kW)
Dynamic brakes
External (11 kW to 55 kW)
Regenerative Built-in (0.2 kW to 7 kW)
resistor External (11 kW to 22 kW)
24 V DC ±15%
control circuit power 1-phase 100 V AC to 120 V AC
supply 1-phase 200 V AC to 230 V AC
1-phase 380 V AC to 480 V AC
1-phase 100 V AC to 120 V AC
1-phase/3-phase 200 V AC to 230 V
Main circuit power
AC
supply
1-phase/3-phase 380 V AC to 480 V
AC
Interface
24 V DC power Built-in
supply
For 200 V: 0.1 kW to 1 kW: Plug-in
type connector
Control circuit
2 kW or more: Terminal block
power/regenerative
For 400 V:
resistor terminal
0.6 kW to 2 kW: Plug-in type
connection method
connector
3.5 kW or more: Terminal block
Main circuit power For 200 V: Terminal block
supply For 400 V: 0.6 kW to 2 kW: Plug-in
terminal connection type connector
method 3.5 kW or more: Terminal block
Auto Real-time auto
tuning tuning: 15 steps
Advanced vibration
suppression control Unprovided
Ⅱ
Adaptive
Provided (Ⅰ)
filter
Notch filter Provided (2 pcs.)
Tough drive function Unprovided
Drive recorder
Unprovided
function
Restart after
instantaneous Supported
power failure
Natural cooling (0.1 kW to 1 kW)
Cooling method
Force cooling (2 kW to 22 kW)
Heatsink
MR-JACN_ (11 kW to 22 kW)
Outside mounting
MR-ACN_ (30 kW to 55 kW)
attachment
○: Compatible; △: Limited functions or compatible with certain conditions; ×: Incompatible
Refer to Appendix page 2-10 for important points to note.
MR-J2S series
Built-in (0.1 kW to 7 kW)
External (11 kW to 55 kW)
* Coasting distance is different.
Built-in (0.2 kW to 7 kW)
External (11 kW to 22 kW)
1-phase 100 V AC to 120 V AC
1-phase 200 V AC to 240 V AC
1-phase 380 V AC to 480 V AC
1-phase 100 V AC to 120 V AC
1-phase/3-phase 200 V AC to 240 V
AC
1-phase/3-phase 380 V AC to 480 V
AC
External supply required
For 200 V: 0.1 kW to 3.5 kW: Plug-in
type connector
5 kW or more: Terminal block
For 400 V:
0.6 kW to 3.5 kW: Plug-in type
connector
5 kW or more: Terminal block
For 200 V: 0.1 kW to 3.5 kW: Plug-in
type connector
5 kW or more: Terminal block
For 400 V: 0.6 kW to 3.5 kW: Plug-in
type connector
5 kW or more: Terminal block
Real-time auto
tuning: 40 steps
One-touch tuning
Provided
Provided (II: with improved function)
Provided (5 pcs.)
Provided
Provided
None
Natural cooling (0.1 kW to 0.6 kW)
Force cooling (0.7 kW to 22 kW)
MR-J4ACN_ (11 kW, 15 kW)
MR-J3ACN (22 kW)
30 kW to 55 kW: Unprovided
Appendix 2-5
*When the renewal tool is used.
When the
renewal tool is
MR-J4 series
External supply
required
For 200 V:
With terminal
block
conversion
For 200 V:
With terminal
block
conversion
(other than of 5
kW)
Compatibility
Remarks
(*)
used
△ (Note 2)
△
(Note 3)
△ (Note 18)
○
×
(Note 4)
△
(Note 19)
△
(Note 19)
○
○
○
○
○
○
× (Note 5)
○ (Note 6)
× (Note 21)