Chapter 5 Setup And Monitoring - Cisco D9054 Installation And Operation Manual

Overview
Control Modes
You can set up and control the D9054 HDTV Encoder using the embedded Web
interface, or a PC and the ROSA management system.
Front Panel Keypad
The operation of the D9054 HDTV Encoder can be monitored using the front panel
keypad and LCD display. You can also change the IP address of the encoder using
the front panel keypad. For further information, see Front Panel Operation,
page 4-1.
Embedded Web Interface
The D9054 HDTV Encoder is delivered with an embedded web-based GUI enabling
you to set up and control the unit via an IP network.
ROSA Management
The ROSA/Copernicus system is a multi-server/multi-client-based system
enabling you to set up and manage a complete network of encoders. In the ROSA
single-user system, the server and client are located on the same PC. Consequently
it has only one simultaneous user. ROSA enables full control and monitoring
functionality of D9054 Encoder installations and redundancy switching, error
reporting and remote control.
4038938 Rev A
Chapter 5
Setup and Monitoring
D9054 HDTV Encoder Installation and Operation Guide 5-1