Control And Management Interfaces - Cisco D9054 Installation And Operation Manual

Control and Management Interfaces

Ethernet Management
The D9054 HD Encoder features an Ethernet management interface which will
support communication with the PNC system in the future. For information on the
Ethernet management interface, see Connecting the Ethernet Management
Interface, page 3-11.
ROSA Management
The ROSA/Copernicus
enabling you to set up and manage a whole network of encoders. In the ROSA
Single-User system the server and client is located on the same PC. Consequently it
has only one simultaneous user. ROSA enables full control and monitoring
functionality of the D9054 HD Encoder installations with redundancy switching,
error reporting and remote control.
Front Panel Control
The front panel supports encoder setup and control of a subset of the parameters
available either via the Web GUI or ROSA control management system (IP address
is one example).
The following drawing shows the front panel with its different sections.
2-10
™
system is a multi-server/multi-client based system
LCD Panel
Navigation/Selection
D9054 HDTV Encoder Intstallation and Operation Guide
Alarm LED
Power LED
Numeric Keypad
4038938 Rev A