Section D - Filter And Fan Replacement; Introduction - Cisco D9054 Installation And Operation Manual

Section D - Filter and Fan Replacement

Introduction

Removal and Replacement
If either the filter or one of the four fans requires replacement, contact Cisco for a
new filter or a fan replacement kit for the specific fan.
Note: There are three different fans (two being the same) in the D9054 HDTV
Encoder. Make note of the location of the failed fan with respect to the others (i.e.,
left, right, or center two) when ordering a replacement.
The kits include instructions on how to remove the existing filter and/or fans
respectively, and installation of the new kit.
The following filter and/or fan kits may be ordered for use with the D9054 HD
Encoder.
Part number
4016244
4016245
4016246
4016247
Filter Cleaning
It is recommended that the filter be cleaned or replaced every 4 months. In dustier
environments the filter should be cleaned or replaced more frequently.
4038938 Rev A
Kit, Filter Replacement, D9054
Kit, Fan Replacement 1, D9054
Kit, Fan Replacement 2, D9054
Kit, Fan Replacement 3, D9054
D9054 HDTV Encoder Intstallation and Operation Guide
Description
6-25