Setting Up The Satellite Nit - Cisco D9054 Installation And Operation Manual

Setting Up the Satellite NIT

To Set Up the Satellite NIT
Proceed as follows to get access to the Satellite NIT display:
1. From the user interface of the D9054 HD Encoder, click the PSI tab, expand the
NIT icon and click the Satellite icon from the sub-pages.
Example of Setup for a DVB Satellite Delivery System
The following table displays a typical example of the NIT for a DVB satellite
delivery system.
Satellite Delivery System Parameters
Frequency
Symbol rate
Orbital position 19.2 (degrees)
West East flag
Polarization
Modulation
FEC inner
5-118
12.266 (GHz)
27.5 (Msymbol/s)
Eastern position
Linear - horizontal
QPSK
3/4 Convolutional code rate
D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A