Selecting The Dolby Digital Audio Descriptor Mode - Cisco D9054 Installation And Operation Manual

Selecting the Dolby Digital Audio Descriptor Mode

To Select the Dolby Digital Audio Descriptor Mode
Proceed as follows to select the Dolby Digital Audio Descriptor Mode:
1. From the user interface of the D9054 HD Encoder, click the PSI tab, expand the
Audio icon and click the Dolby Digital icon from the sub-pages.
2. Select DVB or ATSC for the Audio Descriptor Mode.
This setting determines whether it is signaled in the PMT and PAT that Dolby
Digital audio is transmitted according to the DVB or the ATSC standard. The
default setting is DVB mode.
3. Click Apply.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-109