Setting Up The Reference Output (Mca Card Only) - Cisco D9054 Installation And Operation Manual

Setting Up the Reference Output (MCA card only)

Note: The Reference Output sub-page is only available when the encoder is
equipped with a Multiple Channel Audio (MCA) card. This sub-page is not used for
dual-channel audio applications.
To Set Up the Reference Output
Proceed as follows to set up the reference output:
1. From the user interface of the D9054 Encoder, click the Audio tab and then the
Reference Output icon from the sub-pages.
2. As the default, AES3 and AES4 are set as Reference Outputs. They may be
configured as digital AES inputs if more inputs are required in addition to AES1
and AES2.
The default sample rate is 48 kHz. You may select sample rates of 32, 44.1 or 48
kHz.
3. Click Apply.
5-84 D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A