Setting Up The H.264 Video Encoder - Cisco D9054 Installation And Operation Manual

Setting Up the H.264 Video Encoder

To Set Up the H.264 Video Encoder
Proceed as follows to set up the Video Encoder:
1. From the user interface of the D9054 HD Encoder, click the Video tab and then
the H.264 icon from the sub-pages.
2. Select Enable Encoder to enable the video encoder.
Disabling the video encoder means that the video program will not be encoded.
If you have defined an audio only program it will continue to be encoded.
3. Select the Chroma Format.
The chroma format is fixed at 4:2:0.
If you have problems with the video delay, see Setting Up the H.264 Video
Encoder Delays, page 5-21.
4. Select the Video Encoding Profile.
The default is Main. High Profile is also available if you purchased the High
Profile option license. High Profile provides a marginal reduction in the
required bit rate without degradation in the video quality.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-13