Setting Up The Cable Nit - Cisco D9054 Installation And Operation Manual

Setting Up the Cable NIT

To Set Up the Cable NIT
Proceed as follows to get access to the Cable NIT display:
1. From the user interface of the D9054 HD Encoder, click the PSI tab, expand the
NIT icon and click the Cable icon from the sub-pages.
Example of Setup for a DVB Cable Delivery System
The following table displays a valid example of the NIT for a DVB cable delivery
system:
Cable Delivery System Parameters
Frequency
Symbol rate
Modulation
FEC Inner
FEC Outer
4038938 Rev A
770 (MHz)
6.875 (Msymbol/s)
64-QAM
5/6 Convolutional code rate
RS (204/188)
D9054 HDTV Encoder Intstallation and Operation Guide 5-117