Cisco D9054 Installation And Operation Manual page 205

Reading the System Information or Managing the System,
5. Click Transfer Settings File From Device if you want to create a settings file.
You can save the settings file on your hard disk or on a network where other
D9054 HD Encoders can import the settings file.
Important: You must give the file name the extension ".ini" in order to be
able to see it when you want to Transfer Settings File To Device.
6. If relevant, upgrade the software of your D9054 Encoder. Ensure that the
software application you want to upgrade to is located in a directory/location
on your PC before proceeding with the upgrade.
• To perform a software upgrade, click Upgrade. A window will be displayed
allowing you to enter the location of the file, or to browse to the file.
Note: It is best to locate the software upgrade file in a directory with a short
path (i.e., c:\temp) due to a character-string limitation with Internet Explorer 6.
• Select Transfer. The application will be downloaded to the encoder. This may
take up to a minute.
• When the software application has been transferred to the encoder, a message
will be displayed indicating that the transfer was successful.
• Once the transfer has been completed, the encoder will reboot. This will be
indicated on the front panel LCD by the message - Reset in progress. It may
take a minute or two for the reboot process to be completed.
• Click Reload to update the Boot Code Version on the System page.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide
Continued
5-121