Setting Up The H.264 Pip Video Encoding Parameters - Cisco D9054 Installation And Operation Manual

Setting Up the H.264 PIP Video Encoding Parameters

To Set Up the H.264 PIP Video Encoding Parameters
Proceed as follows to set up the H.264 PIP Video Encoding Parameters:
1. From the user interface of the D9054 HD Encoder, click the Video tab, expand
the PIP/H.264 icon and click the Encoding Parameters icon from the sub-pages.
2. Set the Loop Filter. This enables (Yes) or disables (No) the de-blocking filter that
reduces the appearance of blocking artifacts, especially at low bit rates. The
default is Yes.
3. The HRD Buffer option is set (fixed) at Auto, thereby using the factory set value
of 0. At the default setting, the encoder selects the optimum setting for this field
based on the settings of the other related parameters. It cannot be changed.
4. Click Apply.
5-40 D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A