Logging On to the Web Interface
To Log on to the Web Interface
Proceed as follows to log on to the Web Interface:
1. Open MS Internet Explorer.
2. The encoder defaults to no login for the user interface.
Note: You can choose to configure the system for a user name and password
using the Logon button at the top. The new user name and password take affect
after resetting the encoder.
3. When the GUI is configured for a user name and password, type the IP address
of the D9054 HD Encoder to set up in the Address bar and press Enter.
4. Type the user name.
Hint: If you have forgotten your user name and password contact Cisco
Customer Support to have it reset.
5. Type the password.
5-6
D9054 HDTV Encoder Intstallation and Operation Guide
4038938 Rev A