Section E - Digital Program Insertion (Dpi); Setting Up The Dpi - Cisco D9054 Installation And Operation Manual

Section E - Digital Program Insertion (DPI)

Setting Up the DPI

Overview
Digital Program Insertion (DPI) makes it possible to insert advertisements into
program content in the digital domain. DPI messages are supported in the D9054
HD Encoder in accordance with the SCTE-35 standard. Up to eight DPI messages
can be triggered via contact closures.
DPI messages can be inserted via contact closure or embedded in the HD-SDI input
signal via the SCTE-104 standard. See To Set Up the DPI via the HD-SDI Input
(SCTE-104 standard), page 5-94 for instructions to set up DPI messages via the HD-
SDI input.
To Set Up the DPI via Contact Closure
Proceed as follows to set up the DPI for up to eight contact closures:
1. From the user interface of the D9054 HD Encoder, click the DPI tab.
The GUI displays the global DPI message information and trigger information
for all eight DPI messages.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-87