Reading The D9054 Hd Encoder Temperatures - Cisco D9054 Installation And Operation Manual

Reading the D9054 HD Encoder Temperatures

To Read the D9054 HD Encoder Temperatures
Proceed as follows to read the D9054 HD Encoder temperatures:
1. From the user interface of the D9054 HD Encoder, click the System tab and the
Temperatures icon from the sub-pages.
The GUI automatically displays the temperatures measured by the sensors in
the D9054 HD Encoder. The temperatures signify the following:
Heading
Temperature
Min. Temp.
Max. Temp.
If you receive temperature alarms while the ambient temperature is within the
specifications, you should check whether the air flow is blocked.
Important: If you continue to operate the encoder after a temperature alarm has
been received, the encoder may eventually reach the maximum safe operating
temperature/threshold and shut down. The power supply fan will continue to
operate but the unit will cease to function. When this occurs, power cycle the
encoder by unplugging the power cord from the unit, and then reconnecting it.
5-122
Meaning
The measured temperature.
The lower operational limit.
The upper operational limit.
D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A