Cisco D9054 Installation And Operation Manual page 232

Message Description and Remedy
Description: Passthrough input is
Dolby Digital:
missing.
Passthrough
enabled but no Remedy: Apply passthrough signal.
sync words
Description: Sampling frequency code
Dolby Digital:
field does not match.
Passthrough
FSCOD not valid Remedy: Set the sampling frequencies on
the Dolby encoder and the passthrough
encoder to the same values.
Description: The frame size code field is
Dolby Digital:
not valid.
Passthrough
FRMSZCOD not Remedy: Use a valid bit rate on the Dolby
valid encoder.
Description: The frame size code field is
Dolby Digital:
lower than expected and has changed.
Passthrough
Remedy: Lower the bit rate on the Dolby
FRMSZCOD
encoder.
lower and
changed
Description: The passthrough input
Dolby Digital:
header is corrupted or invalid.
Passthrough
Remedy: Correct the passthrough input
header corrupted
header.
or invalid
Description: The passthrough input
Dolby Digital:
header is incorrect.
Passthrough
header mismatch Remedy: Correct the passthrough input
header.
Description: Sample rate on passthrough
Dolby Digital:
input is incorrect.
Passthrough
sample rate Remedy: Correct the sample rate.
mismatch
Dolby Digital: TS Description: The encoding rate is too high
rate/audio rate compared to the TS rate, or the encoding
mismatch rate is too low. The encoding will restart.
Remedy: Check the settings. Change the
audio encoding rate or increase the TS
rate. If a FIFO error occurs recurrently,
contact the closest Cisco customer
support center.
6-10 D9054 HDTV Encoder Intstallation and Operation Guide
Severity Default
Alarm
Category
Minor B
Minor B
Minor B
Minor None
Major B
Major B
Major B
Major B
4038938 Rev A
Enable
On
On
On
On
On
On
On
On