Uploading Firmware to the D9054 HD Encoder using the Web Interface
To Upload Firmware to the D9054 HD Encoder
Do as follows to upload a new firmware version to the D9054 HD Encoder:
1. From the user interface of the D9054 HD Encoder click System to display the
System page.
2. Click Upgrade to display the Upgrade Application window.
3. Click Browse to search for the directory containing the application package to
upload, or type the path to the file directly in the window.
Note: It is best to locate the application package to upload in a file directory
with a short path (i.e., c:\temp) due to a character-string limitation with Internet
Explorer 6.
4. Click Transfer to accept the file, or choose Cancel to abort the operation.
5. The D9054 HD Encoder will automatically reset itself after approximately 30
seconds. The reset process itself also takes approximately 30 seconds.
6-2
Section A - Firmware Upload
D9054 HDTV Encoder Intstallation and Operation Guide
4038938 Rev A