Section B - Setting Up The Pre-Processor; Setting Up The Pre-Processor Parameters - Cisco D9054 Installation And Operation Manual

Section B - Setting Up the Pre-processor

Setting Up the Pre-processor Parameters

To Set Up the Pre-Processor Parameters
Proceed as follows to set up the Pre-processor:
1. From the user interface of the D9054 HD Encoder, click the Pre-Processor tab.
The Enable Pre-Processor function is not applicable to the D9054 Encoder, and
is disabled.
Go to the Custom Filtering sub-page if you are an expert in pre-processing.
5-42 D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A