Setting Up The Terrestrial Nit - Cisco D9054 Installation And Operation Manual

Setting Up the Terrestrial NIT

To Set Up the Terrestrial NIT
Proceed as follows to get access to the Terrestrial NIT display:
1. From the user interface of the D9054 HD Encoder, click the PSI tab, expand the
NIT icon and click the Terrestrial icon from the sub-pages.
Example of Setup for a DVB Terrestrial Delivery System
The following table displays a valid example of the NIT for a DVB terrestrial
delivery system.
Frequency
Bandwidth
Constellation
Hierarchy
Code rate HP (applies to hierarchical and non-hierarchical
encoding)
Code rate LP (Applies to hierarchical encoding)
Guard interval
Transmission mode
Other frequencies (in use)
4038938 Rev A
Terrestrial Delivery System Parameters
D9054 HDTV Encoder Intstallation and Operation Guide
585 MHz
8 MHz
64-QAM
Non hierarchical
rateHalf
rateTwoThirds
1/32
8k Mode
Yes
5-119