Section G - Setting Up The Psi; Enabling/Disabling The Psi/Si Information - Cisco D9054 Installation And Operation Manual

Enabling/Disabling the PSI/SI Information

Proceed as follows to enable or disable the PSI/SI information:
1. From the user interface of the D9054 HD Encoder click the PSI tab.
2. To enable the PSI/SI information, select DVB or MPEG. The default setting is
Off.
3. Click Apply.
4038938 Rev A

Section G - Setting Up the PSI

D9054 HDTV Encoder Intstallation and Operation Guide 5-103