Chapter 3 Installation - Cisco D9054 Installation And Operation Manual

Overview
Introduction
This chapter describes how to install the D9054 HD Encoder. Before installing the
D9054 HD Encoder, read all safety precautions and guidelines thoroughly.
Qualified Personnel
Only appropriately qualified and trained personnel should attempt to install,
operate or maintain the D9054 HD Encoder.
WARNING:
Allow only qualified personnel to install this product. Otherwise, personal
injury or equipment damage may occur.
In This Chapter
This chapter contains the following topics.
Section A - Rack Installation
General
Section B - Connector Panel
Installing the D9054 HD Encoder
Section C - Connecting the Input/Output Signals
Connecting the Video Inputs
Connecting the Audio Inputs
Connecting to the Contact Closure Interface
Connecting an External Alarm System
Connecting the Ethernet Management Interface
Connecting the IP TS Outputs
Connecting the ASI Outputs and the ASI Monitor
4038938 Rev A
Chapter 3
Installation
Topic
D9054 HDTV Encoder Installation and Operation Guide
See Page
3-2
3-2
3-5
3-5
3-7
3-7
3-8
3-9
3-10
3-11
3-12
3-13
3-1