Cisco D9054 Installation And Operation Manual page 209

Setting Up the Message Parameters,
3. For each of the messages select a Severity from the scroll list.
The following categories are available:
• Critical
• Major
• Minor
• Warning
• Information
4. For each of the messages select alarm Relay A, B, C or none from the relay scroll
list.
Note: Any A-alarm will result in the alarm LED on the front panel being
illuminated. For information on alarm relays, see Connecting an External
Alarm System, page 3-10.
5. Select Trigger Backup if you want the Digital Headend Backup task to be
notified or the ASI output to be turned off when the alarm event occurs. For
further information refer to the Digital Headend Backup, Task Driver for Rosa 3.0,
User's Guide, part number 6985066. If the Trigger Backup box is checked the
ROSA Element Manager will poll the encoder to check whether the alarm event
occurs.
6. Click Apply.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide
Continued
5-125