Cisco D9054 Installation And Operation Manual page 243

Message Description and Remedy
Power supply 1 Description: Power supply 1 has
malfunction malfunctioned due to either (e.g.,)
internal fan failure an over-temperature
condition. Continued operation will lead
to failure.
Remedy: Replace the power supply.
Power supply 2 Description: Power supply 2 has
malfunction malfunctioned due to either (e.g.,)
internal fan failure an over-temperature
condition. Continued operation will lead
to failure.
Remedy: Replace the power supply.
Power-up self- Description: The internal power-up self-
test failed test failed.
Remedy: When persistent, contact your
Cisco customer support center for
assistance.
Regulus Description: An error was detected on the
connection error RS-232 connection to the Regulus
Statistical Multiplex Controller.
Remedy: Check the RS-232 connection
between the Statistical Multiplex
Controller and the encoder. Consult the
manuals for information on how to
interconnect the devices.
Settings file is Description: The received settings file
rejected was illegal, and could therefore not be
applied.
Remedy: Evaluate settings and re-apply
when corrected.
Settings updated Description: The settings have changed
either by a settings file import, a change
via the front panel or via ROSA/SNMP.
Statmux RS-232 Description: An error in the RS-232
interface error statmux interface has been detected.
Remedy: Check that the RS-232 cabling is
OK and that the equipment connected to
the RS-232 interface operates as required.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide
Severity Default
Alarm
Category
Major B
Major B
Critical A
Major B
Information None
Information None
Major B
Enable
On
On
On
On
On
On
On
6-21