Cisco D9054 Installation And Operation Manual page 174

Setting Up the DPI,
9. Enter the Event Source.
This is the Event Source ID for the alternate program to be inserted. The legal
range is from 0 to 15. The default is 0.
10. Enter the Event Number.
This number indicates together with the Event Source the unique identification
of the program to be inserted. The legal range is from 0 to 268435455.
11. Enter the Program ID.
This indicates the ID of the alternate Program to be inserted. The legal range is
from 0 to 65535.
12. Enter the Avail Count.
This parameter represents the expected maximum number of breaks, e.g.,
advertisements, in the program. Entering 0 means that the parameter is not
used. The legal range is from 0 to 255.
13. Enter the Avail.
The Avail parameter is the counter for breaks, e.g. advertisements, in the
program. The counter starts as 1 and you must increment it for each new break
period until a new program starts. Entering 0 means that the parameter is not
used. The legal range is from 0 to 255.
14. Enter the Provider ID.
This is the unique ID of the provider of the program. The legal range is from 0 to
4294967295.
15. Select Enable Provider ID.
Enabling this means that the Provider ID is sent as part of the DPI message.
16. Select Enable Auto Return.
This sets whether the input is to trigger on a dual or single edge and if the Break
Duration time is to be used with or without an automatically generated return
(stop splice).
17. Enable or Disable Send Break Duration according to the SCTE-35 standard.
18. Enter the Break Duration.
This is the splice break duration. You can enter a value in the range from 0 to
8640000. The default is 0.
19. Select DTMF Output Enable to generate a DTMF tone when the advertisement
or break is to start or to set up the open-collector outputs for the Advanced
D98xx series receivers (for example, Cisco D9854 Advanced Program Receiver
and Cisco D9858 Advanced Receiver Transcoder), which supports decoding of
SCTE-35 messages with DTMF descriptor.
5-90
Continued
D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A