Chapter 3 Installation; Overview - Cisco D9040 User And Service Manual

Overview

Introduction
This chapter describes how to install the Encoder Model D9040. Before installing the
D9040 Encoder, read all safety precautions and guidelines thoroughly.
Qualified Personnel
Only appropriately qualified and trained service personnel or operators should
attempt to install, operate or maintain the D9040 Encoder.
WARNING:
Allow only qualified service personnel to install this product. Otherwise,
personal injury or equipment damage may occur.
In This Chapter
This chapter contains the following topics.
Section A - Rack Installation
General
Section B - Connector Panel
Overview
Section C - Connecting the Input/Output Signals
Connecting the Video and Reference Signal Inputs
Connecting the Audio Inputs
Connecting to the Contact Closure or Cue Tone Interfaces
Connecting the Statmux Interface
Connecting an External Alarm System
Connecting the Ethernet Management Interface
Connecting the ASI Outputs and the ASI Monitor Decoder
4020024 Rev C
Chapter 3
Installation
Topic
Installation
See Page
3-2
3-2
3-5
3-5
3-7
3-7
3-8
3-12
3-13
3-14
3-15
3-16
3-1