Honda CRF450R 2009 Service Manual page 71

FRAME/BODY PANELS/EXHAUST SYSTEM
Install the sub-frame while aligning each radiator shroud
lab with each air deaner housing cover slot.
Connect the crankcase breather hose.
Install the ECM to the stay of the sub-frame.
Tighten the sub-frame upper mounting bolls first, then
tighten the lower mounting bolts to the specified torque.
TORQUE :
Upper: 33 N·m (3.4 kgf-m, 24 IbHt)
Right lower: 49 N'm (5.0 kgf-m, 36 IbHtj
Left lower: 33 N'm (3.4 kgf -m , 24 IbHtj
Hook the fuel lank band to the fuel lank band bracket.
Connect the tAT sensor 2P (GRAY) connector.
ECM FUEL TANK BAND
UPF'ER MOUNTING BOLTS
BRIEAl"HER HOSE
LEFT MOUNTING BOLT
2P (GRAY) CONNECTOR
TAB SLOT
RIGHT LOWER
MOUNTING BOLT
3-9