Honda CRF450R 2009 Service Manual page 67

FRAME/BODY PANELS/EXHAUST SYSTEM
Install the radiator shroud by aligning it s tab with the air
I
cleaner housing cover slot.
Install the radiator shroud bolts and collars.
Tighten the upper side bolts to the specified torque.
TORQUE : 5.0 N' m (0.5 kgf' m, 3.7Ibf·ft)
Tighten the lower side bolts securely.
REMOVAUINSTALLATION (After '12)
Remove the seat (page 3-3).
Remove the two upper bolts, lower bolt and collar.
Slide the radiator shroud forward to release the labs,
then slide it rearward until its hook is aligned with the
fuel tank recess .
Remove the radiator shroud by releasing the hook from
the recess.
Installation
IS
in the reverse order of removal.
TORQUE :
Radiator shroud bolt (upper side):
5.2 N'm (0.5 kgf'm , 3.8 IbH t)
BOLTS
(upper side)
SHROUO
BOL TSfCOlLARS
(lower Side)
BOLT/COLLAR
RADIATOR SHROUD
Align
1
TABS
RECESS
HOOK
3-5