Honda CRF450R 2009 Service Manual page 375

FRONT WHEEUSUSPENSION/STEERING
Do
not
gel
grease
on
the brake disc
(X
stopping power
will
be reduced.
Pack the lips of a new left dust seal with grease, and
install it to the wheel hub.
Install the brake disc onlo the wheel hub with the
"DRIVE" mark. facing out.
Install the brake disc bolts and nuts.
Tighten the nuts to the specified torque.
TORQUE: 16 N' m (1 .6 kgf'm , 121bHt)
'09·
'12 Ched< the left side collar for wear or damage
Replace it if necessary.
Install the side collar to the right wheet hub.
'09·
'12 Check the brake disc cover for wear or damage.
Replace it if necessary.
Install the brake disc cover to the left wheel hub.
After '12 Check the side collars for wear or damage.
Replace them if necessary.
Pack the lips of new dust seal with grease, and inslall it
to the wheel hub.
Install the side collars to the wheel hub.
14-15