Honda CRF450R 2009 Service Manual page 417

FRONT WHEEUSUSPENSION/STEERING
nghlen the
lock
nut to the fork cap closely by hand.
Hold the fork cap and tighten the lOCI< nul to the
specified torque .
TORQUE : 29 N'm (3.0 kgf' m, 21Ibf·h )
Pull the outer tube up slowly and install it to the fork
cap.
INSTALLA nON
Install the for\(; leg through the bottom and top bridges,
and lighten the bottom bridge pinch bolts to the
specified torque.
TORQUE : 20 N'm (2.0 kgf'm , 151bHt)
FORK CAP
I
LOCK NUT
- - -- - -
When the fork leg has been disassembled, perform the
~==~;:;::=:;~::::::::~~~::~::;
following:
- Tighten the fork cap to the specified torque.
TORQUE: 45 N'm (4.6 kgf' m, 33 IbHt)
- Adjust the PSF air pressure as specified.
SPECIFIED AIR PRESSURE:
240 kPa (2.4 kgf/cm
2
,
35 psi)
TOOL, U.S.A. only:
Air Fork Pump, O..fiO psi 07AMJ· MENA300
or
07AMJ·KRNA100
- Measure the length between the axle holder and
outer lube.
STANDARD LENGTH :
'15: 316.0 t 2.0 mm (12.44 t O.OS i n)
After ' 15: 319.0
t
2.0 mm (12.56
t
O.OS l n)
14-57