Honda CRF450R 2009 Service Manual page 427

FRONT WHEEUSUSPENSION/STEERING
Assemble the special tool and steering damper as
shown, then place it in a vise.
TOOL:
Spherical bearing remover
07AMD·MENA100
Gently press the spherical bearing out of the damper.
Assemble the special 1 001 and steering damper with a
new spherical bearing as shown, then place it in a vise.
TOOL:
Spherical bearing remover 07 AMD·MENA 100
Use the pressure of the \/ise to gently press the bearing
back
into place.
Install the stopper ring into the groove of the damper
mount securely.
lnslalilhe steering damper (page 14-64).
HPSO DISASSEMBLY
ReconJ the Remove the steering damper (page 14-64).
damping force
adjuster position.
Clean the damper assembly thoroughly.
Install a 4 mm screw to the end cap.
Remove the snap ring while pushing the end
cap. and
then remove the end cap and O-ring .
Remove the washer and return spring from the damper
case .
'09 shown:
'09 shown:
'09 shown :
SPHERICAL BEARING
REMOVER
SPHER1CAL
'09 shown:
I
Push
14-67