Honda CRF450R 2009 Service Manual page 458

REAR WHEEUSUSPENSION
2. Set the damper case in a vise with a piece of wood
or soft Jaws with Ihe compression damping adjuster
(After '14: damping adjuster) facing up.
NOTE:
Do
not over-tighten the vise and distort the damper
case.
Remove the compression damping adjuster (After
'14: damping adjuster).
ADJUSTER
After "4:
3. Fill the damper case and reservoir with KHV10-K2C
~ S: H : OC =K:O = IL = =========:::~~~
(KYB) shock oil through the compression damping
adjuster hole, while slowly pulling the damper rod
oul.
4. Reinstall the compression damping adjuster after
filling the damper.
NOTE :
The damper must be kept upright to prevent shock
oil from leaking oul.
5. Place the damper with the reservoir chamber cap
facing up.
6. Repeat steps 1 to 5 until the chamber cap is
removed from the reservoir.
~~~~~~~====~~~~~~~=
Remove the bladder from the chamber cap.
I
NOTE·
Do
nol use any sort of tool to remove the bladder.
because
it
may damage the chamber cap.
Rep/acslhe
bJadder
Attach a new bladder to the chamber cap.
with
a new one. Do
not
reuse the
removed
one.
15-18