CRANKCASE/CRANKSHAFTITRANSMISSION/BALANCER
Remove the snap
ring,
oil pump driven gear and drive
pin.
Remove the transmission oil drain boll and sealing
~~~~~:;~~!!!!~~~!!!!!!!!~~~~~
washer.
'09
shown:
STAY
Loosen the crankcase bolls in a crisscross pattern in
two or three
steps.
Remove the crankcase botts
,
balancer
shaft
bearing set
plate and
stay.
Place the left crankcase facing down and separate the
~~~~~§~~~~~~~~~~~~=:
left and right crankcase
halves.
Remove the dowel pins and gasket.
Remove the oil pump inner/outer rotors and oil pump
shaft
.
PINS
13-11