CRANKCASE/CRANKSHAFTITRANSMISSION/BALANCER
Align the hose guide
groove with the
crankcase
boss.
Connect
the transmission breather hose to the righ
t
crankcase.
Install the hose guide and tighten the bolt.
Install the remaining pans In the reverse order of
removal.
For installation
of
the removed parts for crankcase
service (page
13-3).
TRANSMISSION
OISASSEMBL Y
Separate the crankcase halves (page
13-10),
Temporarily install the right crankcase on the left
crankcase.
Place the right crankcase facing down and separate the
right and left crankcase
halves.
Remove the shift fork
shafts.
Remove the shift fork guide pins from the gearshift
drum
grooves,
and remove the
gearshift
drum.
Remove the shift
forks.
HOSE
Remove the mainshaft and countershaft assembly
from
~~~~~~~~~~~~~~~~~~~
the right
crankcase.
r
Disassemble
the
transmission:
Keep track of the disassembled parts (gears.
bushings. needle bearing. thrust
washers,
and snap
rings) by sliding them onto a tool or a piece of
wire.
Do
not expand the snap ring more than necessary
for removal. To remove a snap
ring,
expand the
snap ring and pull it off uSing the gear behind it.
13·15