Honda CRF450R 2009 Service Manual page 323

After '14:
Remove the left crankcase cover bolts, clutch cable
guide, clulch cable and left crankcase cover.
NOTE:
l oosen the left crankcase cover bolts in a crisscross
pattem in two or three steps.
The left crankcase cover (stator) is magnetically
attracted to the flywheel, be careful during removal.
Remove the dowel pins and gasket.
FLYWHEEL
REMOVAL
Remove the left crankcase cover (page 12-5).
Hold the flywheel with the special tool and remove the
nul and washer.
TOOL:
Flywheel holder 07725-0040001 or
07AMB·MENA100
(U .S.A. only)
Be
careful not to
Screw the special tool onlo the crankshaft.
bottom lhe adapter
against the
crankshaft
Jeft
end.
TOOL:
Flywheel puller adapter 070MG·KSE0100
or
it may damage
not available in
the oil control
U.S.A .
orifice.
TOOL, U.S.A. only :
Thread protector 07AMC-MEBA110
(This thread protector is included with
07AMC-MEBA100 or can be ordered separately)
ALTERNATOR
12-7