Honda CRF450R 2009 Service Manual page 419

FRONT WHEEUSUSPENSION/STEERING
Inslalithe front brake caliperlbrackel assembly and new
brake caliper mounting bolts.
Tighten the front brake caliper mounting bolts to the
specified torque.
TORQUE : 30 N' m (3.1 kgf' m , 22 Ibf-ft)
Install the brake hose clamp and bolts.
• Align the upper surface of the brake hose protector
with the upper surface of the clamp,
Tighten the bolts securely.
Inslall the front wheel (page 14-16).
Inspecllhe wear rings for wear or damage.
Replace the wear ring, if it is 1.5 mm (0.06 in) or flat
with the Quter lube.
Make sure the wear ring end gaps face rearward.
HANDLEBAR
REMOVAL
Remove the number plale (page 3-6).
After '14: Remove the engine mode select switch!
indicator (page 6-76) from the handlebar.
Remove the handlebar pad from the handlebar.
Remove the wire bands.
Align
CLAMP BOLTS
OUTER TUBE
1.5
mm
(0.06
in)
WEAR RING
HANDLEBAR PAD
14-59