Front Wheel/Suspension/Steering - Honda CRF450R 2009 Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Do not damage the
Carefully remove the slider bushing by prying the slot
slider bushing.
with
a
screwdriver unlillhe slider bushing can be pulled
especially the
off by hand.
sliding surface. To
Remove the following:
prevent loss
o(
tension,
do
not -
Guide bushing
open the slider -
Back-up ring
bushing more than -
Collar('11-'14)
necessary. - Oil seal
- Stopper ring
- Dust seal
FORK DAMPER DISASSEMBLY
'09, '10:
DUST SEAL
sr()PPI'" RING
GUIDE BUSHING
SLIDER BUSHING
'11 - '1 4 : BACK-UP RING GUIDE BUSHING
COLLAR SUDER BUSHING
'09 -
'12: Set the fork damper in a vise with a piece of wood or , - -- - - - - - -- - - - - - - -,
soft jaws to avoid damage. '09 -'12: FORK DAMPER
Hold the fork damper using the special tool.
TOOL:
Fork cap bolt holder, 36 mm 070MB·MEN0100 or
010MB·MENA100
(U.S.A. only)
loosen the fork cap assembly using the special tool
while holding the fork damper,
TOOL:
Lock nut wrench, 49 mm
070MA·MEN0100 or
070MA· MENA 100
(U .S,A. only)
'13- '14:
Hold the fork damper using the special tool.
TOOL :
lock nut wrench, 49 mm
l oosen the fork cap assembly,
14-24
070MA·MEN0100
or
070MA·MENA100
(U,S.A. only)
LOCK NUT WRENCH
'13 - '14:
FORK CAP