Honda CRF450R 2009 Service Manual page 297

CLUTCH/KICKSTARTERIGEARSHIFT LINKAGE
86 careful
not
/0 Install the right crankcase cover while aligning the flat of
damage the
the water pump shaft and balancer shaft groove.
kickstarter spindle
oil seal.
Install and tighten the bolts securely in a crisscross
~~~~~~~[~~~i~~ji
pattern in two or three steps.
~
Connect the lower radialor hose to the water pump
~~~~P
..
~
cover and lighten the hose band screw securely (page
7-13).
Install and lighten the water hose joint bolts securely.
Install the kickslarter pedal on its original position as
~~~~~~~~~~i~~~ii~
mar1<ed during removal. [
Install and tighten a new kickstarter pedal boll to the
specified torque.
TORQUE : 38 N'm (3.9 kgf'm, 28 IbHt)
Install the brake pedal pivot boll (page 16·30).
Fill the radiator with the recommend ed coolant mixture
to the filler neck and bleed the air (page 7-9).
Flilihe transmission wi th the recommended oil
(page 4-20).
Check and adjust the brake pedal height (page 4·29).
Start the engine and check for oil leaks.
11-9