Honda CRF450R 2009 Service Manual page 483

TORQUE :
Shock link nut:
53 N'm (5.4 kgf'm, 39 IbHt)
Shock arm nut (swingann side):
53 N 'm (5.4 kgf'm, 39 IbHt)
Shock arm nut (shock link side) :
53 N 'm (5.4 kgf'm , 39 IbHt)
Shock absorber lower mounting nut:
44 N'm (4.5 kgf' m, 32 IbNt)
REAR WHEEUSUSPENSION
'09 -
'11 Install the lower drive chain rolier with the arrow mart:
r1i9::-:;-;:-"]'--;;~"-;;;~:r.~::::;,--'
side facing out.
After
'11. Instat! the lower drive chain roller with the slepped side
facing out as shown.
Install and tighten the nullo the specified torque.
TORQUE : 12 N·m (1.2 kgf·m, 9lbHt)
SWINGARM
REMOVAL
Raise the rear wheel off the ground by placing a
r;~~;-;;:---l7-eKil:Tir<U'r;;;;;;;'"'l
workstand or equivalent under the engine.
I
(SWINGARM SIDE)
Remove the following:
- Rear wheel (page 15-8)
- Drive chain (page 4-21)
- Brake pedal pivot bolt (page 16·29)
Remove the shock arm nut, washer and bolt (swingarm
side).
Remove the screws and brake hose guides.
15-43