Honda CRF450R 2009 Service Manual page 313

CLUTCH/KICKSTARTERIGEARSHIFT LINKAGE
Hook the retum spring end into the hole in the
crankcase.
Apply molybdenum oil solution to the following area:
- Countershatt-to-idle gear bushing contact area
- Idle gear inner surface
Install the Idle gear
Install the idle gear bushing and idle gear to the
with
the flat side
countershafl.
facing
toward the
outside
01
the
crankcase.
Installihe clutch outer (page 11-20).
Inslall the right crankcase cover (page 11-8).
GEARSHIFT LINKAGE
REMOVAL
Remove the following:
- Right crankcase cover (page 11 -7)
- Clutch ouler (page 11-19)
Clean off any dirt from the gearshift spindle serration.
When remoVing the
Remove the bolt and gearshift pedal.
gearshlff pedal,
mark the pedal
position to ensure
correct reassembly
in
Its
original
locatiOn.
Remove the gearshift spindle assembly and washer
from the crankcase.
'09 -
OUT~ ~
11-25