Honda Accord 2008 Manual page 1944

07/11/02 09:41:39 61TA0000_210_0080
9. To complete the high side (discharge pressure)/ambient air (intake) temperature chart:
• Mark the high side (discharge pressure) temperature on the vertical line.
• Mark the ambient air (intake) temperature on the bottom line.
• Draw a vertical line from the high side (discharge pressure) temperature mark.
• Draw a horizontal line from the vent (delivery) temperature mark until it intersects the vertical line.
NOTE: The low side and intake temperatures should intersect in the shaded area within about 10 % of the
measured humidity level. Any measurements outside the line may indicate the need for further inspection.
＊０３
HIGH SIDE
(DISCHARGE)
PRESSURE
Ambient (Intake) Temperature vs. High Side (Discharge) Pressure
psi
(kPa)
400
(2758)
375
(2586)
350
(2413)
325
(2241)
300
(2068)
275
(1896)
250
(1724)
225
(1551)
200
(1379)
175
(1207)
150
(1034)
125
(862)
65 70 75
(18) (21) (24)
AMBIENT (INTAKE) TEMPERATURE
80 85 90 95
(27) (29) (32) (35)
HUMIDITY
LEVEL
80 %
30 %
100 105 °F
(38) (41) (°C)
(cont'd)
21-79