07/11/02 09:44:34 61TA0000_210_0145
Climate Control
DTC Troubleshooting (cont'd)
30. Check for continuity between the blower motor
relay 4P socket No. 2 terminal and blower motor 2P
connector No. 1 terminal.
*08
Is there continuity?
YES
NO
−
motor relay and blower motor.
31. Measure the voltage between the blower motor
relay 4P socket No. 1 terminal and body ground.
*09
Is there battery voltage?
YES
−
NO
(see page 22-83).
21-144
BLOWER MOTOR RELAY 4P SOCKET
WHT
WHT
BLOWER MOTOR 2P CONNECTOR
Wire side of female terminals
−
Go to step 31.
Repair open in the wire between the blower
BLOWER MOTOR RELAY 4P SOCKET
−
Go to step 32.
Replace the under-hood fuse/relay box
32. Turn the ignition switch to ON (II).
33. Measure the voltage between blower motor relay
4P socket No. 4 terminal and body ground.
BLOWER MOTOR RELAY 4P SOCKET
LT GRN
Is there battery voltage?
−
YES
Check for an open in the wire between the
blower motor relay 4P socket No. 4 terminal and
body ground. If the wire is OK, check for poor
ground at G301 (see page 22-28).
−
NO
Repair open in the wire between the No. 16
(7.5 A) fuse in the driver's under-dash fuse/relay
box and blower motor relay 4P socket.
*10