Honda Accord 2008 Manual page 2171

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:31:41 61TA0000_220_0141

Multiplex Integrated Control System

MICU Input Test

NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test

Mode A (see page 22-120).

Driver's MICU

1. Turn the ignition switch to LOCK (0), and remove the driver's dashboard lower cover (see page 20-152).

2. Disconnect driver's under-dash fuse/relay box connectors N, P, Q, and R.

NOTE: All connector views are wire side of female terminals.

3. Inspect the connector and socket terminals to be sure they are all making good contact.

• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.

• If the terminals look OK, go to step 4.

ＴＡ０８Ａ００Ｊ０００５０６４１９５３ＦＣＡＴ００

CONNECTOR N (16P)

CONNECTOR P (20P)

CONNECTOR Q (20P)

CONNECTOR R (24P)

Chapters

Table of Contents