Honda Accord 2008 Manual page 2194

07/11/02 09:34:59 61TA0000_220_0164
Control Unit Input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test
Mode A (see page 22-120), and make sure the lighting system works properly.
Driver's MICU
1. Turn the ignition switch to LOCK (0), and remove the driver's dashboard lower cover.
2. Disconnect driver's under-dash fuse/relay box connectors D, F, G, N, Q, and R.
NOTE: All connector views are wire side of female terminals.
＊０１
3. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
• If the terminals look OK, go to step 4.
ＴＡ０８Ａ００Ｊ４６６４３４４１９５３ＦＣＡＴ００
CONNECTOR D (16P)
YEL LT GRN WHT
ORN BRN GRY
CONNECTOR F (33P)
GRN
GRN/YEL
CONNECTOR G (13P)
GRN/BLK
BLK
ORN
CONNECTOR N (16P)
YEL ORN
CONNECTOR Q (20P)
BLK BRN
WHT
CONNECTOR R (24P)
BRN BLK
(cont'd)
22-161