Honda Accord 2008 Manual page 2036

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:26:09 61TA0000_220_0006

General Troubleshooting Information

Tips and Precautions

Before Troubleshooting

1. Check applicable fuses in the appropriate fuse/relay

2. Check the battery for damage, state of charge, and

clean and tight connections.

• Do not quick-charge a battery unless the

battery ground cable has been

disconnected, otherwise you will damage

the alternator diodes.

• Do not attempt to crank the engine with

the battery ground cable loosely

connected or you will severely damage the

Handling Connectors

• Make sure the connectors are clean and have no

loose wire terminals.

• Make sure multiple cavity connectors are packed with

dielectric grease (except watertight connectors).

• All connectors have push-down release type locks (A).

• Some connectors have a clip on their side used to

attach them to a mount bracket on the body or on

another component. This clip has a pull type lock.

• Some mounted connectors cannot be disconnected

unless you first release the lock and remove the

connector from its mount bracket (A).

• Never try to disconnect connectors by pulling on their

wires; pull on the connector halves instead.

• Always reinstall plastic covers.

• Before connecting connectors, make sure the

terminals (A) are in place and not bent.

ＴＡ０８Ａ００Ｊ５４２００００００００ＢＢＡＴ００

Chapters

Table of Contents