Honda Accord 2008 Manual page 2306

07/11/02 09:38:46 61TA0000_220_0276
Front Passenger's Power Window Switch Input Test
1. Turn the ignition switch to LOCK (0), open and close the driver's door, then remove the front passenger's power
window switch (see page 22-284).
2. Disconnect the 37P connector (A) from the front passenger's power window switch (B).
＊０１
3. Inspect the connector and socket terminals to be sure they are all making good contact.
• If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
• If the terminals look OK, go to step 4.
ＴＡ０８Ａ００Ｊ５４４６０６４７１２１ＦＣＡＴ００
A
BLU
GRN PUR PNK ORN
B
RED
BLU BLK
BLK
Wire side of
female terminals
(cont'd)
22-273