Honda Accord 2008 Manual page 1741

07/11/02 09:36:14 61TA0000_200_0174
Dashboard
Dashboard/Steering Hanger Beam Removal/Installation (cont'd)
13. If the collar bolts are not screwed fully into the
fixed space adjuster when removing the special
bolts, screw collar bolt into the fixed space adjuster
in the same way as step 13.
14. From outside the driver's door, remove the caps (A),
then remove the bolts (B, C) from outside the
driver's door.
＊１７
Fastener Locations
B
A
A
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
20-172
: Bolt, 3 C : Bolt, 2
B
B
C
C
B
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
15. Lift up on the dashboard (A) to release it from the
guide pins (B). Carefully remove the dashboard
through the front door opening. Take care not to
scratch the body with the collar nuts on the
passenger's side.
NOTE: Do not rest the dashboard on its lower
center cover opening, or it may be damaged. Lay it
on its front or back.
A
B
B
＊１８
B
B