Honda Accord 2008 Manual page 2120

07/11/02 09:29:20 61TA0000_220_0090
Passenger's Under-dash Fuse/Relay Box (MICU) Removal/Installation
NOTE: SRS components are located in this area.
Review the SRS component locations 4-door (see page
24-19), 2-door (see page 24-21), and precautions and
procedures (see page 24-23) before doing repairs or
servicing.
Removal
1. Do the battery terminal disconnection procedure
(see page 22-89).
2. Remove the right kick panel:
• 4-door (see page 20-99)
• 2-door (see page 20-97)
3. Disconnect the connectors from the passenger's
under-dash fuse/relay box (A).
＊０１
4. Loose the mounting bolt from the lower side of
passenger's under-dash fuse/relay box.
5. Remove the mounting bolt from the upper side of
passenger's under-dash fuse/relay box, and
remove the passenger's under-dash fuse/relay box.
Installation
1. Install the relays and connect the connectors to the
2. Install the removed parts in the reverse order of
3. Do the battery terminal reconnection procedure
4. Confirm that all systems work properly.
A
ＴＡ０８Ａ００Ｊ５４２２６５６２０２１ＫＤＡＴ００
passenger's under-dash fuse/relay box, then install
the passenger's under-dash fuse/relay box in the
reverse order of removal.
removal.
(see page 22-89).
22-87