Honda Accord 2008 Manual page 2385

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:42:27 61TA0000_220_0355

Moonroof Control Unit Input Test

NOTE: If the moonroof works OK manually, but will not work in AUTO, or reverses frequently (obstacle detection),

reset the moonroof (see page 22-350) before proceeding with the input test.

1. Turn the ignition switch to LOCK (0).

2. Remove the headliner (see page 20-130).

3. Disconnect the 14P connector (A) from the moonroof control unit (B).

4. Inspect the connector and socket terminals to be sure they are all making good contact.

• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

• If the terminals look OK, go to step 5.

ＴＡ０８ＡＢ９Ｊ３４２０００４０６５１ＦＣＡＴ００

Wire side of

female terminals

Chapters

Table of Contents