Honda Accord 2008 Manual page 2405

07/11/02 09:43:05 61TA0000_220_0375
Power Mirrors
Power Mirror Actuator Replacement (cont'd)
9. Remove the screws and the actuator (A).
＊０４
22-372
Installation
1. Route the wire harness (A) of a new actuator
through the hole in the bracket (B).
A
2. Install the parts in the reverse order of removal.
3. Insert the new actuator terminals into the
connector in the original arrangement.
BLK
YEL/BLK
4. Apply EPT sealer to the intersection of the wire
harness and the 8P connector, then install the 8P
connector in the reverse order of removal.
5. Install the gasket in the reverse order of removal.
6. Reassemble in the reverse order of disassembly.
NOTE: Be careful not to break the mirror when
reinstalling it to the actuator.
7. Reinstall the mirror assembly on the door.
8. Operate the power mirror to ensure smooth
operation.
A
Left
Right
BLK BLK BLK
YEL/WHT BLU/BLK YEL/WHT
YEL/RED
BLU/GRN
Terminal side of male terminals
＊０５
B
＊０６