07/11/02 09:43:05 61TA0000_220_0374
Power Mirror Actuator Replacement
Removal
1. Remove the mirror holder (see page 20-56).
2. Remove the power mirror (see page 20-55), and
disconnect the power mirror 8P connector from the
door wire harness.
3. Remove the gasket (A).
*01
4. Remove the screws from the power mirror 8P
connector (B).
5. Record the power mirror 8P connector terminal
locations and wire colors.
6. Disassemble the power mirror 8P connector (A),
and remove all terminals from it.
*02
A
A
7. Remove the cover (A).
B
A
8. Remove the three screws, and separate the mirror
housing (B) from the bracket (C).
TA08A00J34300044031KBAT00
*03
B
C
(cont'd)
22-371